Solved Bugs With Software Cre_1405 Compared To Cre_1309A; Software Release Cre_1509 - AGFA CR 30-X Service Manual

DD+DIS150.06E
7.2

Solved Bugs with Software CRE_1405 compared to CRE_1309A

Software CRE_1405 contains following bug-fixes:
 In some cases after software upgrade to CRE_1309 or exchange of the slow scan
board the digitizer stops scanning when the first image plate enters the scan unit,
due to a corrupted slow scan E-Label. In software CRE_1405 a mechanism is
implemented which is able to handle wrong information in E-labels.
 At acceptance test execution the sensitivity test (75 kV, 1.5mm Cu, 2x 10 myGy)
yields more than 2000 SAL. Expected: 1800 SAL. In software CRE_1405 the
reference between IP code and sensitivity is optimized.
 CR 30-X Service Client Function "Diagnose Cycle" can be executed, it stays
however with screen "Loading ESF". It is not possible to check any function by the
diagnose cycle. In software CRE_1405 the missing functionality is implemented to
start the diagnose cycle successfully.
8

Software Release CRE_1509

Type of new Software
Release Date
Digitizer SNs
Availability
Prerequisites
Reference Document
*Note:
On MedNet, GSO Library always the latest available software release can be
downloaded.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
01-2011
Software Upgrade
04/2008
5175/100 SN ≥ 3626 and type 5175/110 SN ≥ 6132
MEDNET, GSO Library* (25 MB size)
Software CRE_1509 has only been released with
processing station software NX 2.0.6805 SU1 and SU2.
Together with software upgrade CRE_1509 it is
mandatory to upgrade to NX 2.0.6805 SU1 or SU2, too, if
not yet done earlier.
DD+DIS063.08E, Service Bulletin No. 23, Software
CRE_1509 released to support new PMI2 Boards
(Intranet Link /
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175/100/105/110/120/125
Repair and Service
Software Releases and Patches
Extranet Link)
Agfa Company Confidential
Chapter 3.8 / 12