Software Release Cre_1901; New Features Of Software Cre_1901 - AGFA CR 30-X Service Manual

DD+DIS150.06E
13

Software Release CRE_1901

Type of new Software
Release Date
Digitizer SNs
Availability
Prerequisites
Reference Document
*Note:
On MedNet, GSO Library always the latest available software release can be
downloaded.
13.1

New Features of Software CRE_1901


Support of new digitizers sub types 105, 120 and 125 with different throughput
values for different markets. For details refer to service documentation chapter 11,
Installation Planning.

The Service Client can be installed on Windows 7, 32 bit systems additionally to
Windows XP SP2

Improved service functionalities:
o The serial number of modules is not displayed anymore in the service client
o Improved stall calibration
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
01-2011
Software Upgrade
12/2010
Type 5175/100 SN ≥ 31.684, additionally in SN 31.680
Type 5175/105 SN ≥ 39.001
Type 5175/110 SN ≥ 40.342
Type 5175/120 SN ≥ 41.001
Type 5175/125 SN ≥ 43.001
MEDNET, GSO Library* (25 MB size)
Software CRE_1901 has only been released with
processing station software NX 2.0.6805 SU1 and SU2.
Together with software upgrade CRE_1901 it is
mandatory to upgrade to NX 2.0.6805 SU1 or SU2, too, if
not yet done earlier.
DD+DIS308.10E, Service Bulletin No. 44, Software
CRE_1901 and new Digitizer Subtypes available
(Intranet Link
menu "Exchanged components".
Reason: Some modules have the correct serial number "0", what was
interpreted as a wrong serial number display.
DOCUMENT CONTROL NOTE:
Type 5175/100/105/110/120/125
Software Releases and Patches
/ Extranet Link)
CR 30-X
Repair and Service
Chapter 3.8 / 24
Agfa Company Confidential