CR 30-X/CR 30-X
M
Troubleshooting
Troubleshooting Checklist
The troubleshooting for a malfunction of the digitizer consists of two parts:
•
The first is always to check the status indicator on the digitizer.
•
Other errors need more detailed information and instructions to repair the
malfunction, or they can only be fixed by a Service engineer. In this case,
consult the ASAP UI (Agfa Service Access Package User Interface)
messages on the control PC.
General Errors
Error
The digitizer does
not start up.
46
Operating CR 30-X/CR 30-Xm
Check the power supply. If the power supply is ok, call your
local Service engineer.
Action
2386G EN 20120110