About This Manual - AGFA CR 30-X Service Manual

DD+DIS150.06E
1

About this Manual

This manual is the Service Manual for the digitizer type 5175,
with subtypes 100, 105, 110, 120 and 125.
Name of the digitizer:

Subtypes 100, 105:

Subtypes 110, 120, 125:
All of the above mentioned subtypes are called "digitizer" in this document.
The functional differences between the different subtypes are described in the CR 30-X
Installation Planning Document, DD+DIS172.06E.
The digitizer is part of a system comprising following components:

Digitizer

NX Workstation (Tower or laptop version)

Cassette with Image Plate (IP)
Optional Components (not displayed)

Printer (e.g. Drystar 5302)

Additional Cassettes

Uninterruptible Power Supply (UPS)
Digitizer
NOTE:
This manual covers the digitizer with cassettes and image plates.
For more information to the other system components (NX Workstation, printer) refer to
MedNet, GSO Library.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 3
11-2010
CR 30-X
Digitizer (ex factory no name on the covers)
NX Workstation
Tower Version
Cassette
517511ea.cdr
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175/100/105/110/120/125
Digitizer
Figure 1
Agfa Company Confidential
About this Manual
NX Workstation
Laptop Version
Cassette
Chapter 0 / 7