DD+DIS150.06E
1
Replacing the Covers
1.1
Replacing the Front Cover
REQUIRED SPARE PART*:
Type 5175/100: CM+9 5175 1630 2
Type 5175/110: CM+9 5175 1650 0
* The last digit in the spare part number indicates the spare
part revision at release of this document. When ordering,
the actual revision of the spare part is delivered.
REQUIRED TOOLS:
REQUIRED TIME:
10 min.
DISASSEMBLY:
(1)
Switch off the digitizer.
(2)
Disconnect the mains cable.
(3)
Simultaneously press the two buttons (A)
positioned underneath the feed table.
(4)
Pull out cassette unit (B).
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
3 mm
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Replacements / Repair Procedures
B
A
Agfa Company Confidential
Figure 1
A
Figure 2
Chapter 3.5 / 5