AGFA CR 30-X Service Manual page 171

DD+DIS150.06E
(24) Take off upper part transport unit.
(25) Remove all cables at IP handling board.
(26) Open all cable holders at cassette unit.
(27) Remove IP handling board.
(28) Pull out cable for drawer motor.
(29) Turn a few turns at spindle of cassette
fixation (A).
(30) Remove two screws at the front (B, C).
(31) Remove 2 screws at cassette fixation unit.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 67
Figure 68
A
B
C
Figure 69
Figure 70
Chapter 3.5 / 29
Agfa Company Confidential