AGFA CR 30-X Service Manual page 357

DD+DIS147.08E
OVERVIEW OF MODIFICATIONS:
Timeline Modification
2008
April Introduction Software CRE_1509
April All-in-One Cart available
2007
November Introduction Software CRE_1405
September Change of Manufacturer of internal FireWire Cable
August Introduction Software Patch CRE_1309A
May Introduction Software CRE_1309
May Modified Calibration Board
May Small Parts Kit as part of Digitizer Delivery
May Introduction of Transport Unit with modified lower
front Roller
May CD with Limit Pattern is Part of Delivery
May Introduction of Distance Holder in the Rear
March Change of FireWire Cabling inside Digitizer
March Modified Locking Pin of Cassette Locking Unit
March Modified FireWire Connector in the Rear
March Modified segmented Transport roller and Added
Erasure Unit Guide Plate
March Modified Safety Brackets for Prescan Roller
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
05-2008
Manufacturing Standard Modifications
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 /100/110
Referenced Documents
Service Bulletin # 23,
DD+DIS063.08E
Service Bulletin # 24,
DD+DIS110.08E
Service Bulletin # 20,
DD+DIS329.07E
Service Bulletin # 19,
DD+DIS301.07E
Service Bulletin # 18,
DD+DIS304.07E
Service Bulletin # 13,
DD+DIS158.07E
Service Bulletin # 12,
DD+DIS148.07E
Spare Parts List CR 30-X,
DD+DIS325.06M, Rev. 2
Service Bulletin # 12,
DD+DIS148.07E
Chapter 1, Controls,
Connectors and Setup
Procedure, DD+DIS150.06E
Rev. 1
Service Bulletin # 12,
DD+DIS148.07E
Service Bulletin # 12,
DD+DIS148.07E
Service Bulletin # 12,
DD+DIS148.07E
Service Bulletin # 11,
DD+DIS101.07E
Service Bulletin # 12,
DD+DIS148.07E
Service Bulletin # 12,
DD+DIS148.07E
Chapter 8 / 3
Agfa Company Confidential