AGFA CR 30-X Service Manual page 188

DD+DIS150.06E
CAUTION:
IP jams possible if IP guide plate is deformed.
Do not bend IP guide plate at removal.
(15) Slide IP guide plate to the left and lift it out.
(16) Remove screws at magnets.
(17) Remove magnets.
ASSEMBLY:
(1) Mount in reverse order.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 109
517535ai.cdr
Figure 110
Chapter 3.5 / 46
Agfa Company Confidential