Installation Planning-Checklist - AGFA CR 30-X Service Manual

DD+DIS172.06E
1

Installation Planning-Checklist

# Step
1.
Ask the Agfa sales representative
for a contact person in the
hospital.
2.
Make yourself familiar with the
System Overview.
3.
Make yourself familiar with the
scope of delivery.
4.
Make yourself familiar with the
available accessories.
5.
Have a look at the machine
dimensions.
6.
Check the required free space
around the digitizer.
7.
Make yourself familiar with the
warnings and notes concerning
system integration.
8.
Compare the required ambient
and climatic conditions with the
condition at the installation place.
9.
Make an appointment with the
house electrician or the authorized
electrician and check the required
electrical connection.
10. Make yourself familiar with the
digitizer specifications.
11. Have a look at the digitizer safety
standards and regulations.
12. Confirm the installation readiness. To be sure that all required pre-
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
11-2010
Goal
To schedule an installation date with the
customer.
To see in which environment the digitizer
will be installed.
Basic information, to see whether
additional, site specific material for
installation might be required.
To be able to order required accessories
before the installation.
To be able to check, whether the digitizer
fits in the desired installation place.
To see whether enough free space for
repair and maintenance is available.
To be aware of the peculiarities when
integrating the digitizer into the CR 30-X
system.
To prevent installation of the digitizer in
an inappropriate environment, leading to
functional faults.
To be able to initiate all required
prerequisites in advance to allow proper
electrical connections.
To acquire all relevant data which might
be required for installation and operation
of the digitizer.
To inform the operator of the device about
the safety guidelines, regulations and
proper handling of the digitizer.
installation conditions are fulfilled.
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175/100/105/110/120/125
Installation Planning
section
Last
Page
Chapter 11 / 6
Agfa Company Confidential
1 2 3
See Done
-
2
3
3.1
4
5
6
7
8
9
10