DD+DIS150.06E
2.2.11
Service Client Menu "Selftest of Device"
The 'Selftest of Device" menu allows a reboot with selftest of the digitizer via CR30-X
Purpose
service client. The functional sequence of the selftest is identical to the selftest during
switch-on.
Refer to chapter 2, Functional Description.
(1) Select "Analysis & Repair - Selftest of device".
Usage
(2) Wait till the digitizer has rebooted. This takes approximately 1 minute.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2010
Figure 18
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Tools and auxiliary Means
Agfa Company Confidential
Chapter 3.2 / 23