AGFA CR 30-X Service Manual page 169

DD+DIS150.06E
(16) Slide IP guide plate to the left and lift it out.
(17) Disconnect cable at roller IP sensor.
(18) Open three cable holders at right hand
side.
(19) Open five cable holders at left hand side.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 59
Figure 60
Figure 61
Figure 62
Chapter 3.5 / 27
Agfa Company Confidential