Accessories
5
6
Chapter 6 / 8
Unpacking ADC Easylift
Wear safety shoes and gloves while unpacking and installing ADC Easylift.
(1) Cut the fixing straps.
(risk of injury) and lift
off the wooden lid.
(2) Lift Easylift off the
case and unwrap it.
(3) Put it on firm ground
for further installation
steps
Installation Instructions
(1) Loosen 2 screws
connecting upper
and lower front
cover (1)
(2) Loosen 2 screws at
each side of lower
front cover (2).
(3) Draw off the lower
front cover while
lifting it a bit (3)
ADC System Components
(Type 4406)
HOME
Figure 2
3mm allen key
Figure 3
DD+DIS160.02E
Edition 1, Revision 12