Operation Terminal Digitizer - AGFA ADC Compact Plus Manual

Controls, Connections and Setup Procedures
4
Chapter 1 / 18

Operation Terminal Digitizer

Display Functions
The key operator level is intended to be used by the normal operator. He uses
the system only to produce diagnostic usable images without the requirement
for special technical skill or background.
Key Function
·
Gives an image the status of
emergency when sending it
to the Processing Station
·
Provides access to
advanced key-operator
functions
· Quits the current function,
exits a menu without saving
modifications
· Exit from key-operator mode
and service level
· Moves the cursor one
position up to previous edit
field
· Scrolls upwards or
increments digits in a
numeric entry field
· Scrolls backwards through
multiple choices within a field
· Moves the entry position in a
numerical field in descending
order (from right digit to left
digit) and toggles between
values in a field
ADC Compact Plus
Key
(Type 5146)
DD+DIS064.02E
Function
· Starts erasing images without
scanning them
· Gives access to service level
functions
· Exits the service level
· Confirms the keyboarded
input
· In case of some non-fatal
errors, confirms that you
have noticed this state
· Proceeds with the Digitizer
operation when "LOCKED"
condition has occurred.
· Moves the cursor one
position down to next edit
field
· Scrolls downwards or
decrements digits in a
numeric entry field
· Scrolls backwards through
multiple choices within a field
· Moves to entry position in a
numerical field in ascending
order (from left digit to right
digit) and toggles between
values within a field.
Edition 1, Revision 4