Display Power; Display Schedule Reboot - H3C S3100-52P Command Manual

Command Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch

3.1.8 display power

Syntax
display power [ unit unit-id [ power-id ] ]
View
Any view
Parameter
unit-id: Unit ID of a switch.
power-id: Power ID.
Description
Use the display power command to view the working state of the power supply of the
switch.
Example
# Display the working state of the power supply.
<H3C> display power
Unit 1
power
State
Type
The above information indicates that the type of the power is AC, and the power
supplies normally.

3.1.9 display schedule reboot

Syntax
display schedule reboot
View
Any view
Parameter
None
Description
Use the display schedule reboot command to display information about scheduled
reboot.
Related command: reboot, schedule reboot at.
1
: Normal
: AC
Chapter 3 Device Management Commands
3-6