Display Schedule Reboot; Display Uplink Monitor - H3C S7500 Series Command Manual

Command Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches

3.1.12 display schedule reboot

Syntax
display schedule reboot
View
Any view
Parameters
None
Description
Use the display schedule reboot command to display information about scheduled
reboot.
Related commands: reboot, schedule reboot at.
Examples
# Display the information about scheduled reboot.
<H3C> display schedule reboot
System will reboot at 16:00:00 2004/11/1 (in 2 hours and 5 minutes).

3.1.13 display uplink monitor

Syntax
display uplink monitor
View
Any view
Parameters
None
Description
Use the display uplink monitor command to view information about Layer 3
connectivity between the local device and the remote device.
Related commands: uplink monitor.
Examples
# View information about Layer 3 connectivity between the local device and the remote
device.
<H3C> display uplink monitor
Chapter 3 Device Management Commands
3-9