Display Transceiver Manuinfo Interface - H3C s3600 series Command Manual

Transfer distance(xx)
Digital Diagnostic Monitoring
Vendor Name
Ordering Name

display transceiver manuinfo interface

Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver manuinfo interface command to display part of the electrical label
information of a single or all anti-spoofing pluggable transceivers customized by H3C.
Examples
# Display part of the electrical label information of the anti-spoofing pluggable transceiver customized
by H3C on interface GigabitEthernet 1/1/4.
<Sysname> display transceiver manuinfo interface gigabitethernet 1/1/4
GigabitEthernet1/1/4 transceiver manufacture information:
Manu. Serial Number
Manufacturing Date
Vendor Name
Field
: 213410A0000054000251
: 2007-07-28
: H3C
3-13
Description
Transfer distance, with xx representing km for
single-mode transceivers and m for other
transceivers. If the transceiver supports multiple
transfer medium, every two values of the transfer
distance are separated by a comma. The
corresponding transfer medium is included in the
bracket following the transfer distance value.
The following are the transfer media:
9 um: 9/125 um single-mode fiber
50 um: 50/125 um multi-mode fiber
62.5 um: 62.5/125 um multi-mode fiber
TP: Twisted pair
CX4: CX4 cable
Whether the digital diagnosis function is
supported, where:
YES: supported
NO: not supported
Vendor name or vendor name specified of the
transceiver:
The anti-spoofing transceiver customized by
H3C: H3C is displayed.
Other transceivers: The original vendor name
is displayed.
Ordering name of the transceiver