Display Transceiver Diagnosis Interface - H3C s3100 series Command Manual

Table 3-6 Description on the fields of display transceiver alarm interface
transceiver current alarm information
TX fault

display transceiver diagnosis interface

Syntax
display transceiver diagnosis interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver diagnosis interface command to display the currently measured value of
digital diagnosis parameters of a single or all anti-spoofing transceivers customized by H3C.
Examples
# Display the currently measured value of digital diagnosis parameters of the anti-spoofing pluggable
optical transceiver customized by H3C on interface GigabitEthernet 1/2/2.
<Sysname> display transceiver diagnosis interface gigabitethernet 1/2/2
GigabitEthernet1/2/2 transceiver diagnostic information:
Current diagnostic parameters:
Temp(°C) Voltage(V)
35 3.26
Table 3-7 Description on the fields of display transceiver diagnosis interface
Field
transceiver diagnostic information
Current diagnostic parameters
Temp.(°C)
Voltage(V)
Bias(mA)
RX power(dBM)
TX power(dBM)
Field
Bias(mA) RX power(dBM)
6.18 -35.64
Digital diagnosis information of the transceiver carried by an
interface
Current diagnostic parameters
Digital diagnosis parameter-temperature, in °C, with the
precision to 1°C.
Digital diagnosis parameter-voltage, in V, with the precision to
0.01 V.
Digital diagnosis parameter-bias current, in mA, with the
precision to 0.01 mA.
Digital diagnosis parameter-RX power, in dBM, with the
precision to 0.01 dBM.
Digital diagnosis parameter-TX power, in dBM, with the
precision to 0.01 dBM.
3-10
Description
Current alarm information of the transceiver
TX fault
TX power(dBM)
-5.17
Description