L2Vpn Control-Word - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

l2vpn control-word

[ no | default ] l2vpn l2VpnName control-word
Syntax
Command introduced in JUNOSe Release 8.1.0.
Release Information
Indicates that the local preference is to use the control word for the layer 2 packets
Description
encapsulated in the MPLS packets that are sent to the remote PE router. The no
version indicates that the local preference is to not use the control word for the layer
2 packets encapsulated in the MPLS packets that are sent to the remote PE router.
The default version accepts the preference determined by the interface stack on
which the MPLS interface is stacked.
Options
Global Configuration
Mode
Related Topics
1182
l2vpn control-word
l2VpnName Name of the VPWS instance
Configuring an L2VPN Instance in the JUNOSe BGP and MPLS Configuration Guide