Junos Software Release Notes For Ex Series Switches; New Features In Junos Release 10.1 For Ex Series Switches - Juniper JUNOS 10.1 - RELEASE NOTES REV 4 Release Note

JUNOS 10.1 Software Release Notes
If your device is running an earlier release, upgrade to one of these releases and then
to the 10.1 release. For example, to upgrade from Release 9.2R1, first upgrade to
Release 9.2R4 and then to Release 10.1R2.
For additional upgrade and download information, see the JUNOS Software
Administration Guide and the JUNOS Software Migration Guide.

JUNOS Software Release Notes for EX Series Switches

New Features in JUNOS Release 10.1 for EX Series Switches

New features in Release 10.1 of JUNOS Software for EX Series switches are described
in this section.
Not all EX Series software features are supported on all EX Series platforms in the
current release. For a list of all EX Series software features and their platform support,
see
New features are described on the following pages:
186
JUNOS Software Release Notes for EX Series Switches
New Features in JUNOS Release 10.1 for EX Series Switches on page 186
Changes in Default Behavior and Syntax in JUNOS Release 10.1 for EX Series
Switches on page 189
Limitations in JUNOS Release 10.1 for EX Series Switches on page 190
Outstanding Issues in JUNOS Release 10.1 for EX Series Switches on page 193
Resolved Issues in JUNOS Release 10.1 for EX Series Switches on page 196
Errata in Documentation for JUNOS Release 10.1 for EX Series
Switches on page 199
Upgrade and Downgrade Issues for JUNOS Release 10.1 for EX Series
Switches on page 200
EX Series Switch Software Features Overview
Hardware on page 187
Access Control and Port Security on page 187
Bridging, VLANs, and Spanning Trees on page 187
Class of Service (CoS) on page 188
Infrastructure on page 188
Interfaces on page 188
Layer 2 and Layer 3 Protocols on page 188
Management and RMON on page 188
MPLS on page 189
Packet Filters on page 189
.