Network and Security Manager Administration Guide
My Reports
Shared Reports
Working with Reports
816
Table 117: SSL/VPN Reports
Report
Description
Top 10 active users
Ten users with highest number of Bytes Out and Bytes Out in SSL/VPN
based on total bytes
logs.
Top 10 auth failures for
Ten users with highest number of authentication failures in SSL/VPN
user@realm
logs during the last 24 hours.
For more specific information describing each report, refer to the Network and Security
Manager Online Help.
EX Series Switches Report
Table 118 on page 816 lists and describes a report in NSM that provides information about
EX Series session logs.
Table 118: EX-Switch Reports
Report
Description
Top Configuration
The ten EX Series switches with the highest number of configuration
changes (last 1 week)
changes during the last seven days.
For more specific information describing each report, refer to the Network and Security
Manager Online Help.
Once you are comfortable using reports, you can create your own custom reports to
provide the exact information that your network security needs require. My Reports are
associated with a specific user across domains.
You can also allow others to use your custom reports by creating them as a shared report.
Shared Reports are associated with domains. Subject to user-defined access control
settings, shared reports are available to all other users in the domain.
You can use the Report Manager to perform the following actions:
Generating a Predefined Report on page 817
Creating a Custom Report on page 817
Deleting Reports on page 818
Organizing Reports in Folders on page 818
Generating Reports Automatically on page 818
Exporting Reports to HTML on page 822
Copyright © 2010, Juniper Networks, Inc.