Ex Series Switches - Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 3 Release Note

Network and Security Manager 2010.3 Release Notes

EX Series Switches

30
519447—The Only this Value and Not this Value filters in the Log Viewer do not work
for IPv6 Src, Dst, Src NAT, and Dst NAT address objects.
519888—NSM cannot create a single tunnel interface VPN using VPN manager. NSM
builds NHTB entries using the egress interface of the end device, instead of the tunnel
interface.
521704—An NSM user is able to delete the user role logged in as from NSM.
521930— The Junos OS applications node in templates shows extra options that are
not present in the actual device for both predefined and custom applications.
522853— Modification of a modeled vsys configuration does not work on an
ISG2000-IDP device.
523092—NSM does not allow selection of the dates of March 29, 30, and 31 while
creating a new log report.
523099— NSM displays deleted vsys information.
523176—For log reports, if Columns for Report is selected with IPv6 address fields, the
report displays an extra IP 0.0.0.0.
523190—Username and Password text boxes are displayed only when Authentication
Type is initially set as Certificate and then set back to Basic.
523484—NSM displays the wrong version number after performing a software upgrade
for devices running the Junos OS.
524124—NSM shows the configuration status of a device as Managed,InSync after
successfully importing a configuration file exported from the same device. The
workaround is to update the device after importing the configuration file.
524216—Predefined Junos OS service objects junos-persistent-nat and junos-stun
are not available in NSM.
526007—Resetting to Factory Defaults does not work after performing Offline Update
Recovery Partition on an NSM3000 appliance. The workaround is to re-install the
image through USB.
526499—After upgrading to NSM 2010.2, when checking the HA server version, the
highAvailSvr process displays the current version as 1.13.1 instead of 2010.2, and also
displays old versions.
541154—After an upgrade from 2010.2 to 2010.3, policy names are getting overwritten
with the corresponding policy IDs during a J Series or SRX Series device update.
394552—NSM allows you to apply Layer 2 Uplink port templates on LAG interfaces
(ports names beginning with 'ae'). NSM cannot automatically detect whether a LAG
interface is deleted from the switch configuration after you apply the port template.
It is therefore recommended that you manually remove the LAG interface from the
ports associated with this template.
398326—After enabling the automatic import of configuration files on an EX Series
switch running Junos OS Releases prior to 9.3R2 and 9.2R3, you need to manually add
Copyright © 2010, Juniper Networks, Inc.