Native-Vlan-Id - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Required Privilege
Level
Related
Documentation

native-vlan-id

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1410
®
OS for EX Series Ethernet Switches, Release 10.4
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Media MTU on page 1304
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 1284
Configuring Routed VLAN Interfaces (CLI Procedure) on page 1601
Setting the Protocol MTU on page 1314
native-vlan-id vlan-id;
[edit interfaces interface-name unit 0 family ethernet-switching]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the VLAN identifier to associate with untagged packets received on the interface.
—Numeric identifier of the VLAN.
vlan-id
Range: 0 through 4095
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show vlans on page 1737
show ethernet-switching interfaces on page 1445
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 1284
Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 1287
Understanding Bridging and VLANs on EX Series Switches on page 1501
See the Junos OS Network Interfaces Configuration Guide.
Copyright © 2010, Juniper Networks, Inc.