Table of Contents
Advertisement
Units of Measure
X
1.3
RELATED DOCUMENTS
The tables in this section list additional documents that you may find useful in designing systems
incorporating MCS 96 microcontrollers. These are not comprehensive lists, but are a representa-
tive sample of relevant documents. For a complete list of available printed documents, please or-
der the literature catalog (order number 210621). To order documents, please call the Intel
literature center for your area (telephone numbers are listed on page 1-11).
Intel's ApBUILDER software, hypertext manuals and datasheets, and electronic versions of ap-
plication notes and code examples are also available from the BBS (see "Bulletin Board System
(BBS)" on page 1-9). New information is available first from FaxBack and the BBS. Refer to
"Electronic Support Systems" on page 1-8 for details.
The following abbreviations are used to represent units of measure:
A
amps, amperes
DCV
direct current volts
Kbytes kilobytes
KΩ
kilo-ohms
mA
milliamps, milliamperes
Mbytes megabytes
MHz
megahertz
ms
milliseconds
mW
milliwatts
ns
nanoseconds
pF
picofarads
W
watts
V
volts
µA
microamps, microamperes
µF
microfarads
µs
microseconds
µW
microwatts
Uppercase X (no italics) represents an unknown value or an
immaterial ("don't care") state or condition. The value may be either
binary or hexadecimal, depending on the context. For example,
2XAFH (hex) indicates that bits 11:8 are unknown; 10XX in binary
context indicates that the two LSBs are unknown.
GUIDE TO THIS MANUAL
1-5
Advertisement
Table of Contents
