Intel 8XC196K Series User Manual page 639

E
EA#, 15-3, 16-13, 16-14, B-11
and P5.0, 6-13
and P5.3, 6-14
and programming modes, 16-14
idle, powerdown, reset status, B-20, B-22,
B-23
EBR (indirect) instruction, A-2
ECALL instruction, A-2
EE opcode, and unimplemented opcode interrupt,
A-3, A-47
EI instruction, 5-11, A-3, A-15, A-47, A-53, A-59
EJMP instruction, A-2
Enabling a timer/counter, 10-18, 10-19, C-75,
C-76
EPA, 2-10, 10-1–10-36
and PTS, 10-12
block diagram, 10-2
capture data overruns, 10-24, C-42
capture/compare modules, 10-9
programming, 10-20
choosing capture or compare mode, 10-22,
C-40
compare modules
programming, 10-20
configuring pins, 10-2
determining event status, 10-28
enabling remapping for PWM, 10-21, C-40
enabling the compare function, 10-25, C-33
multiplexed interrupts, 10-29
re-enabling the compare event, 10-22, 10-25,
C-33, C-41
resetting the timer in compare mode, 10-24,
C-42
resetting the timers, 10-23, 10-26, C-34, C-42
selecting the capture/compare event, 10-22,
C-41
selecting the compare event, 10-25, C-33
selecting the time base, 10-21, 10-25, C-33,
C-40
shared output pins, 10-10
starting an A/D conversion, 10-23, 10-26,
C-33, C-41
using for PWM, 5-31, 5-37
See also port 1, port 6, PWM, timer/counters
EPA0–3, EPA8–9, B-11
EPA0_CON, C-88
Index-4
EPA0–EPA9, 10-3, B-11
EPA0_TIME, C-88
EPA1_CON, 10-21, C-40, C-88
EPA1_TIME, C-88
EPA2_CON, C-88
EPA2_TIME, C-88
EPA3_CON, 10-21, C-40, C-88
EPA3_TIME, C-88
EPA4_CON, C-88, C-89
EPA4_TIME, C-89
EPA5_TIME, C-89
EPA6_TIME, C-89
EPA7_CON, C-89
EPA7_TIME, C-89
EPA8_CON, C-89
EPA8_TIME, C-89
EPA9_CON, C-89
EPA9_TIME, C-89
EPAIPV, 5-4, 10-4, 10-29, 10-30, C-89
EPA_MASK, 10-3, C-88
EPA_MASK1, 10-3, C-88
EPA_PEND, 10-3, C-88
EPA_PEND1, 10-4, C-88
EPAx interrupts
and TIJMP, 10-29, 10-31
EPAx_CON, 10-4
settings and operations, 10-20
EPAx_TIME, 10-4
EPTS instruction, 5-11, A-15, A-46, A-53, A-59
ESD protection, 6-2, 6-7, 6-16, 13-5
Event, 10-1
Event processor array‚ See EPA
EXT instruction, A-2, A-15, A-42, A-48, A-54
EXTB instruction, A-2, A-16, A-42, A-48, A-54
EXTINT, 5-3, 14-1, 14-6, B-12
and powerdown mode, 14-4, 14-5, 14-6
hardware considerations, 14-7
F
FaxBack service, 1-8
FE opcode
and inhibiting interrupts, 5-8
Floating point library, 3-4
Formulas
A/D conversion result, 11-9, 11-14
A/D error, 11-12
A/D series resistance, 11-11