Inspection Activities; Inspection Of Controller - ABB OmniCore C30 Product Manual

4.2 Inspection activities

4.2.1 Inspection of controller

Inspecting the OmniCore C30 controller
1
2
3
4
Product manual - OmniCore C30
3HAC060860-001 Revision: P
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
Inspect connectors and cabling to make
sure they are securely fastened and
cabling not damaged.
Inspect the fans and ventilation holes to
make sure they are clean.
© Copyright 2019-2022 ABB. All rights reserved.
4 Maintenance
4.2.1 Inspection of controller
Note/illustration
Location of wrist strap button:
xx1800000683
xx1800000062
Continues on next page
203