ABB IRB 930 Product Manual page 274

5 Repair
5.5.2 Replacing the axis-1 oil tank
Continued
2
3
Refitting the axis-1 oil tank
Use these procedures to refit the axis-1 oil tank.
Refitting the oil tank
1
2
3
Continues on next page
274
Action
Remove the screws on the oil tank to the inner
arm.
Remove the oil tank.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Refit the oil tank.
Secure the screws on the oil tank to the inner arm.
© Copyright 2023 ABB. All rights reserved.
Note
xx2300000511
Note
Screws: Hex socket head cap
screw M4x10 12.9 Lafre
2C2B/FC6.9 (5 pcs)
Tightening torque: 2.4 Nm ±3%
xx2300000511
Product manual - IRB 930
3HAC086009-001 Revision: A