5 Repair
5.7.1 Replacing the axis-1 motor sub-assembly
Continued
Disconnecting the connectors for axis-1 motor
1
2
3
Removing the base bracket
1
Continues on next page
430
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Disconnect the connectors.
•
R2.MP1
•
R2.FB1
Snap loose and remove the female head of the
connectors from the bracket.
Note
The harness are not visible due to the cleanness
requirements of the illustration. They are still ex-
isting inside the cable ferrule in the actual situ-
ation.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
© Copyright 2023 ABB. All rights reserved.
Note
xx2300000504
xx2300000505
Note
Product manual - IRB 930
3HAC086009-001 Revision: A