ABB IRB 930 Product Manual page 74

3 Installation and commissioning
3.5.2 Customer connections
Continued
Connector kits, outer arm
The table describes the CP/CS and Ethernet (if any) connector kits for the outer
arm.
Position
Connector kits
Protection covers
Protection covers for water and dust proofing
Protection covers are delivered together with the robot and must be well fitted to
the connectors in any application requiring water and dust proofing.
Always remember to refit the protection covers after removing them.
xx2300000176
A
B
C
Continues on next page
74
Description
CP/CS
Ethernet
Note
If the protection covers are not refitted back with the connectors exposed, the
protection class will be lost.
D C
A
Protection covers for air hose connector on the base
Protection covers for air hose connector on the process hub
Protection covers for C2/SMB connector on the base and C1/C2 connector on
the process hub
© Copyright 2023 ABB. All rights reserved.
M12 CPCS Male straight connect-
or kits
M12 CPCS Male angled connector
kits
M12 Ethernet Cat5e Male straight
connector kits
M12 Ethernet Cat5e Male angled
connector kits
Art. no.
3HAC066098-001
3HAC066099-001
3HAC067413-001
3HAC067414-001
B
C
Product manual - IRB 930
3HAC086009-001 Revision: A