Changing Oil, Axis-2 Gearbox - ABB IRB 930 Product Manual

4 Maintenance

4.8.3 Changing oil, axis-2 gearbox

4.8.3 Changing oil, axis-2 gearbox
Location of oil plugs
The oil plugs of the gearbox are located as shown in the figure.
xx2300000466
A
B
Required tools and equipment
Equipment, etc.
Oil collecting vessel
Oil dispenser
Standard toolkit
Consumable
Material
Lubricating oil
Continues on next page
106
Oil plug, filling and venting
Oil plug, filling, draining and venting
Article number
-
-
-
© Copyright 2023 ABB. All rights reserved.
Note
The capacity of the vessel must be
sufficient to take the complete amount
of oil.
One example of oil dispenser can be
found in section
gearboxes on page
Content is defined in section
toolkit on page
Note
Information about the oil is found in Technical refer-
ence manual - Lubrication in gearboxes.
See Type and amount of oil in gearboxes on page
Type of lubrication in
100.
Standard
596.
100.
Product manual - IRB 930
3HAC086009-001 Revision: A