Refitting The Body Covers - ABB IRB 14000 Product Manual

3
4
5
6

Refitting the body covers

1
Product manual - IRB 14000
3HAC052983-001 Revision: D
Action
Fit the lamp to the signal lamp base.
Fit the signal lamp assembly to the robot.
Connect the lamp cable connector.
The signal lamp is now ready for use and is lit in
MOTORS ON mode.
Action
Refit the front and lower body cover.
Note
Be aware of the tab underneath the cover so it
does not get damaged.
xx1500000564
© Copyright 2015 - 2016 ABB. All rights reserved.
2 Installation and commissioning
2.3.6 Installing the signal lamp
Note
xx1500000615
xx1500000616
Note
Screws: 3HAC050368-005 (5 pcs).
Tightening torque: 0.2 Nm.
xx1400002603
Continues on next page
Continued
83