2 Installation and commissioning
2.3.6 Installing the signal lamp
2.3.6 Installing the signal lamp
General
The signal lamp is packed and delivered separately, and should be installed by
a system integrator.
A signal lamp with a yellow fixed light can be installed on the robot or to a suitable
fixture at the working area. The lamp signals that motors are powered, and it allows
the user to meet UL requirements.
Location of signal lamp
The signal lamp is located as shown in the figure.
xx1500000051
Required parts
Spare part
Signal lamp
Hex socket head cap screw
Torx pan head screw
Continues on next page
80
CAUTION
Article number
3HAC053350-001
3HAC050368-005
3HAC050367-005
© Copyright 2015 - 2016 ABB. All rights reserved.
Note
Includes attachment screws.
M2x8 8.8
M3x12 8.8 Gleitmo 605
Product manual - IRB 14000
3HAC052983-001 Revision: D