ABB IRB 14000 Product Manual page 386

4 Repair
4.7.14 Replacing the expansion board complete
Continued
2
3
4
Closing the computer
1
2
Continues on next page
386
Action
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the
section WARNING - The unit is sensitive to ESD!
on page 55
Fit the expansion board complete by pushing it
into the connector on the motherboard.
CAUTION
Always grip the expansion board around the
edges to avoid damage to the board or its com-
ponents.
CAUTION
Push carefully so no pins are damaged. Make
sure that the expansion board is pushed straight
into the connector.
Fasten the expansion board complete with the
attachment screws.
Action
DANGER
Make sure that all supplies for electrical power
and air pressure are turned off.
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the
section WARNING - The unit is sensitive to ESD!
on page 55
© Copyright 2015 - 2016 ABB. All rights reserved.
Note
DSQC1003 Expansion board com-
plete: 3HAC046408-001
A
xx1300000859
A Attachment screw (2 pcs)
Note
Product manual - IRB 14000
3HAC052983-001 Revision: D