Refitting The Power Supply - ABB IRB 14000 Product Manual

4
5

Refitting the power supply

Use this procedure to refit the power supply.
Refitting the power supply
1
2
3
Product manual - IRB 14000
3HAC052983-001 Revision: D
Action
Disconnect the cables, cut cable ties if necessary:
• G1.SK2
• G1.(-)
• G1.(+)
• G1.N
• G1.L
• GND
Remove the attachment screws that fastens the
power supply.
Action
Place the new power supply on the bottom cover
and tighten the attachment screws.
Connect the cables on the side of the power sup-
ply.
• G1.SK2
• G1.(-)
• G1.(+)
• G1.N
• G1.L
• GND
Fasten the cables with cable ties.
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.7.4 Replacing the power supply
Note
xx1500000287
Note
Power supply: 3HAC047966-001
Screws: M4x6 8.8-A2F (7 pcs).
Tightening torque:
xx1500000287
Continues on next page
Continued
323