Preparations Before Removing The Fan; Removing The Fan - ABB IRB 14000 Product Manual

Removing the fan

Use this procedure to remove the fan.

Preparations before removing the fan

1
2
Removing the fan
1
2
3
Product manual - IRB 14000
3HAC052983-001 Revision: D
Action
DANGER
Turn off all:
• electric power supply
• air pressure supply
to the robot, before starting the repair work on the
robot.
Check if there is enough space beneath the robot
to remove the bottom cover. If not:
• Place the robot in its calibration position.
• Remove the fastening screws.
• Put the robot on a flat and stable surface
in the following position:
Action
DANGER
Make sure that all supplies for electrical power
and air pressure are turned off.
Remove the bottom cover.
CAUTION
Be careful not to damage the cables.
Disconnect the fan connector:
• E1.XS1
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.7.2 Replacing the controller fan
Note
xx1500000370
Note
xx1500000310
Continues on next page
Continued
311