ABB IRB 14000 Product Manual page 313

2
Concluding procedure
1
Product manual - IRB 14000
3HAC052983-001 Revision: D
Action
Refit the bottom cover and tighten the screws.
CAUTION
Be careful not to damage the cables.
Action
CAUTION
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section
- First test run may cause injury or damage!
on page 53.
© Copyright 2015 - 2016 ABB. All rights reserved.
4.7.2 Replacing the controller fan
Note
Screws: M3x6 8.8-A2F (4 pcs).
Tightening torque: 0.2 Nm
xx1500000310
Note
DANGER
4 Repair
Continued
313