ABB IRB 14000 Product Manual page 406

4 Repair
4.7.16 Replacing the fieldbus adapter
Continued
Removing the fieldbus adapter
1
2
3
4
5
Continues on next page
406
Action
DANGER
Make sure that all supplies for electrical power
and air pressure are turned off.
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the
section WARNING - The unit is sensitive to ESD!
on page 55
(Depending on which connection is installed)
Disconnect the connector:
• Profibus/S: A32.2
• Ethernet/IP/S: A32.1
• ProfiNet/S: A32.3
Loosen the attachment screws (2 pcs) on front of
the fieldbus adapter to release the fastening
mechanism.
Note
Do not remove the attachment screws, only loosen
them.
Grip the loosened attachment screws and gently
pull the fieldbus adapter straight out.
© Copyright 2015 - 2016 ABB. All rights reserved.
Note
xx0700000193
A Attachment screw (2 pcs)
B Fastening mechanism
A
xx1500001755
Product manual - IRB 14000
3HAC052983-001 Revision: D