ABB IRB 14000 Product Manual page 387

3
4
5
6
Refitting the fieldbus adapter
1
2
Product manual - IRB 14000
3HAC052983-001 Revision: D
Action
Connect the fan connector.
CAUTION
Be careful not to stretch or squeeze the fan cable.
Fasten the computer cover with its attachment
screws.
(Depending on which connection is installed)
Connect the connector:
• Profibus/S: A32.2
• Ethernet/IP/S: A32.1
• ProfiNet/S: A32.3
Make sure the robot system is configured to re-
flect the installed parts.
Action
DANGER
Make sure that all supplies for electrical power
and air pressure are turned off.
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the
section WARNING - The unit is sensitive to ESD!
on page 55
© Copyright 2015 - 2016 ABB. All rights reserved.
4.7.14 Replacing the expansion board complete
Note
xx1300000684
A Attachment screw (4 pcs)
B Cover
Note
4 Repair
Continued
A
B
Continues on next page
387