Refitting The Battery Pack - ABB IRB 14000 Product Manual

3 Maintenance
3.4.1 Replacing the battery pack
Continued

Refitting the battery pack

Use these procedures to refit the battery pack.
Refitting the battery pack
1
2
3
4
Continues on next page
124
Action
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the
section WARNING - The unit is sensitive to ESD!
on page 55
Fit the battery and and secure it with a cable tie.
Note
Battery includes protection circuits. Only replace
with a specified spare part or with an ABB-ap-
proved equivalent.
Connect the battery connector (X3).
Refit the body cover.
© Copyright 2015 - 2016 ABB. All rights reserved.
Note
xx1500000506
xx1500000505
Tightening torque: 0.9 Nm.
xx1500000697
Product manual - IRB 14000
3HAC052983-001 Revision: D