ABB IRB 14000 Product Manual page 116

3 Maintenance
3.3.2 Inspecting, signal lamp
Continued
2
3
116
Action
DANGER
Turn off all:
• electric power supply
• air pressure supply
to the robot, before starting the inspection work on
the robot.
If the lamp is not lit, trace the fault by:
• Make sure that the signal lamp is not broken.
If so, replace it.
• Inspect the cable connections.
• Inspect the cabling. Replace the cabling if a
fault is detected.
© Copyright 2015 - 2016 ABB. All rights reserved.
Note
Art. no. is specified in section
Required tools and equipment on
page 115.
For details about how to replace
the signal lamp, see Installing the
signal lamp on page 80.
Product manual - IRB 14000
3HAC052983-001 Revision: D