ABB IRB 14000 Product Manual page 378

4 Repair
4.7.13 Replacing the mass memory card
Continued
Refitting the mass memory card
Refitting the mass memory card
1
2
3
4
Refitting the fan
1
2
378
Action
DANGER
Make sure that all supplies for electrical power
and air pressure are turned off.
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the
section WARNING - The unit is sensitive to ESD!
on page 55
CAUTION
Make sure that the memory card is oriented cor-
rectly before inserting it. Otherwise the memory
card or the memory slot may be damaged.
Gently push the memory card with the finger until
it clicks into place.
Action
Connect the fan connector.
• E1.XS1
Refit the bottom cover and tighten the screws.
CAUTION
Be careful not to damage the cables.
© Copyright 2015 - 2016 ABB. All rights reserved.
Note
Mass memory with boot loader:
3HAC047184-003
Note
Screws: M3x6 8.8-A2F (4 pcs).
Tightening torque: 0.2 Nm
xx1500000310
Product manual - IRB 14000
3HAC052983-001 Revision: D