3.3.2 Inspecting, signal lamp
Location of signal lamp
The signal lamp is located as shown in this figure.
xx1500000051
Required tools and equipment
Equipment, etc.
Signal lamp
Standard toolkit
Inspecting, signal lamp
Use this procedure to inspect the function of the signal lamp.
1
Product manual - IRB 14000
3HAC052983-001 Revision: D
Action
Verify that the signal lamp is lit when motors are put
in operation ("MOTORS ON").
© Copyright 2015 - 2016 ABB. All rights reserved.
3.3.2 Inspecting, signal lamp
Art. no.
Note
3HAC053350-001
To be replaced if damage is detected.
-
Content is defined in section
ard toolkit on page
Note
3 Maintenance
Stand-
449.
Continues on next page
115