ABB IRB 14000 Product Manual page 407

Refitting the fieldbus adapter
Use this procedure to refit the fieldbus adapter.
Refitting the fieldbus adapter
1
2
3
4
Product manual - IRB 14000
3HAC052983-001 Revision: D
Action
DANGER
Make sure that all supplies for electrical power
and air pressure are turned off.
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the
section WARNING - The unit is sensitive to ESD!
on page 55
Fit the fieldbus adapter by pushing it along the
rails on the motherboard.
CAUTION
Always grip the fieldbus adapter around the edges
to avoid damage to the adapter or its components.
CAUTION
Make sure that the adapter is pushed straight onto
the rails.
Push carefully so no pins are damaged.
Fasten the fieldbus adapter with its attachment
screws.
© Copyright 2015 - 2016 ABB. All rights reserved.
4.7.16 Replacing the fieldbus adapter
Note
xx0700000193
A Attachment screw (2 pcs)
B Fastening mechanism
Continues on next page
4 Repair
Continued
407