Endshields; Opening Endshield - MacDon D65 Operator's Manual

5. Double-reel headers, center reel arm: Use handle (B) to
move lock rod (A) to the outboard position.

3.2.3 Endshields

A hinged, polyethylene endshield is fitted on each end of the header.

Opening Endshield

The header endshields cover components. To access the components you will need to open the endshield.
1. Remove lynch pin (A) and tool (B) from pin (C) at the top
rear of the endshield.
2. Use tool (B) to unlock latch (A) at the lower rear corner of
the endshield.
3. Lift the endshield at the aft end to clear the pin at the top
rear of the endshield.
4. Swing the endshield out and away from the header while
maintaining forward pressure to prevent the endshield
from slipping out of tab (C) at the front of the endsheet.
214327
OPERATION
Figure 3.6: Reel Safety Prop – Center Arm
C
A
Figure 3.7: Left Endshield
C
B
Figure 3.8: Left Endshield
35
A
B
B
A
Revision B