Endshields; Opening Endshields - MacDon D65 Operator's Manual

3. Use the handle (B) to move the lock rod (A) to the
outboard position.

3.2.3 Endshields

A hinged, polyethylene endshield is fitted on each end of the header.

Opening Endshields

1. Remove lynch pin (A) and tool (B) from pin (C) at top
rear of endshield.
147725
OPERATION
Figure 3.6: Reel Safety Prop – Center Arm
Figure 3.7: Left-Hand Endshield
35
Revision A