Deck Shift / Float Presets - MacDon M2170 Operator's Manual

Deck Shift / Float Presets

The buttons to control header functions are located on the console.
Draper header with deck shift option:
• Controls the draper deck position for double windrowing
with a draper header.
• Set header float for each deck position. For instructions,
refer to Setting Float, page
NOTE:
The last float setting used in any deck shift position will be stored
into memory automatically.
Float presets:
These buttons select header float presets. For instructions, refer
to Setting Float Options with Fixed Deck, page 300
to preset the float.
NOTE:
For detailed switch operating modes, refer to the section in this
manual that is specific to your header.
262170
OPERATOR'S STATION
297.
to learn how
A
Figure 3.68: Header Deck Shift Buttons
A - Right-Side Delivery
C - Left-Side Delivery
A
Figure 3.69: Header Switches
A - Float Preset 1
C - Float Preset 3
85
B
C
B - Center Delivery
B
C
B - Float Preset 2
Revision A