E5071C
Printing Output Values in the Echo Window
Overview
•
Entering Values Output to Echo Window
•
Opening Echo Window
•
Clearing Values Output from Echo Window
•
Other topics about Operation Basics
Overview
The echo window, which appears in the lower part of the E5071C
measurement screen, can be used to display a message or the return value
(data) of an object.
Entering Values Output to Echo Window
You can use the COM objects listed below to enter values output to the
echo window.
ECHO
•
SCPI.DISPlay.ECHO.DATA
•
Opening Echo Window
You can use the COM objects listed below to open the echo window.
SCPI.DISPlay.TABLe.TYPE
•
SCPI.DISPlay.TABLe.STATe
•
Alternatively, you can also open the echo window using the following key
sequence:
> Echo Window (ON)
Macro Setup
Clearing Values Output from Echo Window
You can use the COM object shown below to clear values output from the
echo window.
SCPI.DISPlay.ECHO.CLEar
•
Alternatively, you can also clear values output from the echo window using
the following key sequence:
> Clear Echo
Macro Setup
1348