9. Lamp inverter board (INV) / LED board (LEDB) (e-STUDIO206L/256/306/356/456/506)
Controls lighting of the exposure lamp (EXP). The control PC board is different depending on the
light source. The xenon lamp is controlled by the lamp inverter board and the LED is controlled by
the LED board.
It is installed on the rear side since the scanner thickness is reduced. The lamp inverter board is
shown in the figure.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Lamp inverter board
Fig. 3-32
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
3 - 47
OUTLINE OF THE MACHINE
3