Toshiba e-STUDIO206L Service Manual page 84

Registration clutch OFF

Less than regulation time
Exit sensor OFF
If the exit sensor is not turned OFF after the
regulation time

Paper jam (E020) The copying operation
is stopped
• Reverse sensor detects jamming of the leading edge of paper: e-STUDIO356/456/506 / 357/457/
507
Exit sensor ON

Less than regulation time
Reverse sensor ON
If the reverse sensor is not turned ON after the
regulation time

Paper jam (E570) The copying operation
is stopped.
• Reverse sensor detects jamming of the tailing edge of paper: e-STUDIO356/456/506 / 357/457/
507

Exit sensor OFF

Less than regulation time
Reverse sensor OFF
If the reverse sensor is not turned OFF after
the regulation time

Paper jam (E580) The copying operation
is stopped.
• Immediately after the power ON

Any of all sensors on paper transport path detects paper (ON)

Paper jam (E030)
• Front cover is opened during copying

Paper jam (E410)
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
OUTLINE OF THE MACHINE
Registration clutch
Exit sensor
Timer
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
3 - 36
OFF
ON
0
Regulation time
Paper jam (E020)
Fig. 3-20