Hitachi Compute Blade 2000 User Manual page 524

Partition power cap information is described in the table below.
Item Description of item
P Partition number
Power capping
function of the server
Power cap
blade that belongs to
a partition
Control mode of
Mode
power capping
Maximum value of
power consumption
Upper limit by the server blade
that belong to a
partition
Exception Exceptional
handling processing
Priority order to power-off when the maximum power consumption is exceeded is
described in the table below.
Item Description of item
Order Priority order
P Partition number
Value Description of value
0 to 7 -
------- No server blade slot that belongs to a
partition.
(Only current) No server blade that
belongs to a partition is installed.
Enable Power capping is enabled.
Disable Power capping disabled.
------- No server blade slot that belongs to a
partition.
(Only current) No server blade that
belongs to a partition is installed.
When power capping is disabled.
Static
Static control
Dynamic
Dynamic control
------- No server blade slot that belongs to a
partition
No setting value is set.
Integer
Maximum power consumption value
(Unit: watt)
------- No server blade slot that belongs to a
partition.
Warning Only warning when the maximum
only power consumption value defined by
a user is exceeded.
Warn & Set Warning and lowering the central
Frequency processing unit (CPU) frequency
forcibly when the maximum power
consumption value defined by a user
is exceeded.
Value Description of value
Partition priority order to turn off
power when the maximum power
consumption is exceeded.
Power-off begins with partition #1 in
Integer
numerical order.
This setting is available regardless of
whether or not a partition exists or
blade is installed.
0 to 7 -
473