OIL COOLER PIPE LINE
Preceding Work : Removal of upper intake manifold
1 Upper Intake Manifold
2 Bolt (M6 X 35, 1 piece) ........................... 9-11 Nm
3 Bolt (M6 X 16, 2 pieces) ......................... 9-11 Nm
Removal & Installation Procedure
1. Drain the coolant.
2. Unscrew the bolts (2, 3) and remove the oil cooler pipe line (4).
Replace the O-ring with new one.
Tightening Torque
Installation Notice
3. Installation should follow the removal procedure in the
reverse order.
4. Fill up the coolant as specified.
5. Check the leaks in the cooling system.
4 Oil Cooler Pipe Line
5 O-ring .................................................... Replace
9 - 11 Nm
M162 ENGINE COOLING 1D1-11